Home >
Poultry
Equipment > Poultry Shed Equipment
Poultry Shed Equipment
HJN International supplies a massive range of Poultry Equipment
including products from the following manufacturers;
° Lubing
° Plasson
° Tiga
° VDL
° Lyon Debeaking
Lubing Water Quality Guidelines
Lubing recommends that each nipple drinker user ensures that
the water quality conforms to the requirements, Please note that
you should flush thoroughly at least once between flocks.
Lubing Fogging Systems
The Lubing Top Climate System was developed for an effective humidifying,
cooling and dust binding of the house air. It works according
to the principle of the direct evaporative cooling.Through high
pressure nozzles water is injected into the house air with a pressure
of 70 bar as fog. The fog evaporates immediately and thereby it
extracts heat energy from air. So it comes to a cooling of the
house air. The ventilation rate can be throttled and saved by
this cooling effect energy. At the heating period and after the
arrival of young animals the LUBING Top Cliamte System is used
for the rise of the humidity to the optimal value.
Your advantages at a glance:
• a fast cooling in the house without any wetness.
• Increase of the humidity onto every desired value (greatest
good health between 60 - 70% relative humidity).
• Positive influence on the breath organs of the animals
through the dust binding.
• More active animals through just right climate.
• Better feeding utilisation.
• Optimal performance.
• Reduction in aggresssive behaviour.
• Use of the system for soaking and disinfection.
Floor Watering Systems
The
central element of the floor-watering system is the TOP Nipple,
that ensures an optimum flow for every age of the animal. The
combination of TOP Nipple and Drip Cup ensures a dry manure. The
right height depends on the size of the animals.
Click for more information on Poultry Floor Watering Systems
Medicators
The
main water supplies from LUBING include all components which are
needed for an optimal water supply include, the water meter, the
pressure reducing valve, the water filter and the medicator.
These single components are interconnected by flanges and allow
an easy and fast exchange of components. For fast and problem
free installation and removal in the house all components are
fastened on galvanised metal bracket.
The medicator works with out power and is integrated into the
main water supply. The water pressure acts as starting power.
The medicator sucks the concentrate (medicine, vitamins, etc)
out of the mixer, measures out the required percentage of the
dose and mixes it together with the incoming water in the mixing
box.
This solution will be carried into the drinking system. The dosage
is constant and proportional to the water quantity also at possible
pressure and through fluctuations.
Egg Curve Conveyors
For
layer farms of all sizes the conveyor system is of crucial importance.
Variations in battery arrangement as a rule always require a tailor
made engineered solution.
Many years of practical experience with LUBING conveyor systems
have reaffirmed our leading international position.
Egg Curve Conveyors work on the following concepts:
• Maximum operational safety and minimum maintenance.
• A unit construction system with elements designed to cope
with any imanginable spot requirtements, all kinds of curves,
heights and distances.
• onveyor belt widths of between 200 and 750 mm.
• Capcities ranging from 15,000 to 65,000 eggs per hour.
• Ideally economic , relying on as much technology as necessary.
VDL Chain Feeding
The
separate hopper type SHT-1D with content of 100 litr, is designed
specially for aviary systems, where adlib feeding is commonly
practised. Becuase of the special construction and position of
the feed return wheel in this hopper, no feed is wasted. The return
wheel guarantees that the feed is pushed back into the hopper.
The hopper can be suspended and supported. This hopper will be
used in combination with the direct drive units with speeds varying
between 12 - 18 - 36 mtr / min.
Feedhoppers
are avaliable in various models, varying from one track to four
tracks, single or opposite direction. The capacity of each feedhopper
has been designed for the most efficient feeding.
As an optional, an extension can be used to increase the capacity
of the feedhopper. Thanks to to its rigid construction, as well
as the easy access to all vital parts, among which the shearpin
security, the agitating mechanism and drive unit, this complete
system is prepared for long life operation.
As
an optional separate drive units are avaliable, that can be located
at any position in the feeding circuits. The specially designed
round shaped corner feedhoppers are the perfect solution for chainfeeding
in small poultry houses or for automatic chainfeeding on layercage
systems.
The VDL Agrotech chain feeder located at the end of the circuit
has a rotoscreen with a special hole pattern for optimal seperation
of dirt from the feed. For the high speed feed chain, a feed cleaner
with speed reducer has been designed to secure optimal feeding.
Lyon Debeaking Equipment
Every
day the Super Debeaker is use by turkey growers, hatcherymen,
broiler growers, egg producers, and game bird breeders everywhere.
The Super Debeaker debeaks and cauterizes in a single operation.
This inhibits bleeding and beak regrowth. Birds usually begin
eating right after debeaking.
The Super Debeaker is supplied complete as shown with K blade,
standard beak support, and 6 foot power cord. Choose the method
of debeaking you prefer. Hjn supplies a full line of Blades, Attachments
and Power Units for all types of debeaking, wing notching, and
toe clipping.
Outstanding Features
Proven – The Super Debeaker is accepted
and used by poultrymen around the world.
Rugged – Designed for years of trouble
free service with minimum maintenance.
Economical – Long life gives extremely
low cost per bird.
Adaptable – A full line of Blades, Attachments
and Power Units for all types of debeaking and toe clipping.
Flexible – Suitable for small, medium or
large producer.
Versatile – Can be operated by power unit
or foot pedal.
Mini Vents
HJN
International engineers and manufacturers mini vents to customer
requirements. Typically mini vents are 1400 mm long by 225 mm
deep and fabricated from galvanised sheet steel with X Grade Styrene
Insulation on the Door Assembly. Smaller or larger vents can be
easily designed and manufactured to suit a particular installation.
We manufacture in-house our own awning pulley used for the mini
vents and can provide a cometitive quotation for the mini vent
winches and associated equipment.
Egg and Manure Belting
Polyester
Belts - These are high tenacity polyester woven belts
which offer a good resistance with a low elongation. These are
very soft belts and they adapt themselves to the collection channel.
All polyester belts can be woven in different ways: herringbone,
plainweave or tied tubular, in widths from 50 mm to 700 mm and
they can be personalised.
Jute Belts - One of the principal characteristics
of jute belts is the capacity to absorb the eggs breaking without
dirtying the others during transport, thanks to the naturalness
of the fibre. The jute belts can be joined by glue or seam. Our
supplier produces 3 types of jute belt.
Polypropylene Belts - These belts are able to
guarantee an absorption of the eggs breaking and also the cleaning
of the other eggs during transport, this is possible because its
a woven belt. The polypropylene yarn is extremely resistant to
bacteria and funguses without particular additional finishings
and it also resists to the action of acids and alkali. The polypropylene
does not absorb water and does not retain humidity, for this reason
the polypropylene belts is not affected by climate or sudden changes
in temperature. One of the characteristics of these belts is the
possibility to wash them in cold water. The polypropylene yarn
is stabilised with UV rays and treated with antistatic so it doesn't
attract the dust. The polypropylene belts can be joined sewing
or soldering them by ultrasounds.
Coolpads
HJN
International coolpad systems are designed to suit each individual
shed and bird population requirement, we use 45/15 flute coolpads
and moulded 100% UV Plastic retaining systems.